4mL Vials, Inserts and Caps
4mL Vials, Inserts and Caps
4.0mL Screw Top Vials
Designed to work in Shimadzu and Waters WISP™ 48 position autosamplers. Choose from clear or amber Type I borosilicate glass. Vials incorporate the unique StepVial design that precisely centers a limited volume insert in the vial neck. Available with graduated marking spots which can be written on with a pencil. J.G. Finneran is the original designer and manufacturer of the Glass Insert/Plastic Outside Vial (Glastic). Glastic is a unique combination of Type I low extractable borosilicate glass insert and a clear or amber thermoplastic polymer outer vial shell. The glass is the only contact between the sample and the seal.
Vials
 |
 |
 |
| 30313TG-1545, 33113-1545 | 34013E-1545, 34013-1545 | 32513P-1545, 31213P-1545 |
| Description | Part Number |
| 4.0mL Standard Screw Top Vials | |
| 4.0mL Clear 13-425 Vial 100 Pack | 34013-1545 |
| 4.0mL Amber 13-425 Vial 100 Pack | 34013-1545A |
| 4.0mL Clear 13-425 Vial with White Graduation Spot 100 Pack | 34013E-1545 |
| 4.0mL Amber 13-425 Vial with White Graduation Spot 100 Pack | 34013E-1545A |
| 4.0mL Limited Volume Vials | |
| 300µL Glass Insert in Clear 13-425 Plastic Vial 100 Pack | 30313TG-1545 |
| 3.1mL 13-425 High Recovery Glass Vial 100 Pack | 33113-1545 |
| Plastic Limeted Volume Vials | |
| 1.2mL Polypropylene Vials 100 Pack | 31213P-1545 |
| 2.5mL Polypropylene Vials 100 Pack | 32513P-1545 |
Screw Caps and Septa
Available in a wide assortment of colors. Designed for use with all autosamplers.Choose the preassembled caps with septa best suited for your application. The patented Top Hat™ septa and closure was designed to provide a positive physical lock to assure that preassembled components arrive intact. Refer to Septa Selection Guide in the technical section above to choose the 13mm septa best suited for your application.
 |
 |
 |
| 13-425 Open Hole Caps (no Liner) | 13-425 Top Hat Closures | 13mm Septa |
| Description | Part Number |
| 13-425 Open Hole Caps (No Liner) | |
| 13-425 Black, Polypropylene Open Hole Cap 100 Pack | 5310-13 |
| 13-425 Blue, Polypropylene Open Hole Cap 100 Pack | 5310-13B |
| 13-425 Green, Polypropylene Open Hole Cap 100 Pack | 5310-13G |
| 13-425 Red, Polypropylene Open Hole Cap 100 Pack | 5310-13R |
| 13-425 Yellow, Polypropylene Open Hole Cap 100 Pack | 5310-13Y |
| 13-425 Solid Top Storage Caps | |
| 13mm Solid Top, Black Polypropylene Unlined Cap 100 Pack | 5320-13 |
| 13mm Solid Top, Black Polypropylene PTFE/F217 Lined Cap 100 Pack | 5360-13 |
| 13-425 Septa/Liners | |
| 13mm x 0.010” White PTFE Septa 100 Pack | 601010-13 |
| 13mm x 0.040” Red PTFE/Silicone/Red PTFE Septa 100 Pack | 604060-13 |
| 13mm x 0.060" PTFE/Red Rubber Septa 100 Pack | 606040-13 |
| 13mm x 0.060" Red PTFE/Silicone Septa 100 Pack | 606050-13 |
| 13mm x 0.060" Re PTFE/Silicone w/Slit Septa 100 Pack | 606070-13 |
| Preassembled 13-425 Caps and Septa | |
| Black Closure, PTFE/Silicone/PTFE Septa, 0.040" 100 Pack | 804060-13 |
| Black Closure, Red PTFE/Silicone Septa, 0.065" 100 Pack | 806550-13 |
| Black Top Hat™ PTFE/Silicone Septa/Closure (Patented) 100 Pack | 806550TH-13 |
Limited Volume Inserts
Inserts are available preassembled with a polymer bottom spring or patented Top Spring™.The polymer spring acts as a shock absorber that protects against breakage if the needle bottoms out.The conical design permits complete sample removal. The Step Insert precisely sits in the neck of the vial, thus eliminating the need for metal or plastic springs.
 |
 |
| 4025GF-827, 4035GF-842, 403BS-638X, 403TS-638 | 4027P-744, 403PBS-638, 403PTS-638 |
| Description | Part Number |
| Conical Glass Inserts | |
| 250µL Glass Step Insert, w/Glass Flange 100 Pack | 4025GF-827 |
| 300µL Glass Insert, No Spring 100 Pack | 403-638X |
| 300µL Glass Insert, w/Bottom Spring 100 Pack | 403BS-638X |
| 300µL Glass Insert, w/Patented Top Spring™ 100 Pack | 403TS-638 |
| 350µL Glass Step Insert, w/Glass Flange 100 Pack | 4035GF-842 |
| Metal Spring for 300µL Insert 100 Pack | 4000-638 |
| Flat Bottom Glass Inserts | |
| 500µL Glass Flat Bottom Insert 100 Pack | 405-843 |
| Conical Polypropylene Inserts | |
| 275µL Polypropylene Insert | 40275P-744 |
| 300µL Polypropylene Insert, No Spring 100 Pack | 403P-638 |
| 300µL Polypropylene Insert, w/Bottom Spring 100 Pack | 403PBS-638 |
| 300µL Polypropylene Insert, w/Patented Top Spring™ 100 Pack | 403PTS-638 |
| Agilent | Waters | Velocity | Description |
| 5183-4448 | 186000840 | 34013-1545 | 15x45mm Clear Glass Vial, 13mm/425 Thread |
| 5183-1450 | 186001135 | 34013-1545A | 15x45mm Amber Glass Vial, 13mm/425 Thread |
| WAT073018 | 801010-1545 | 15x45mm Clear Glass Vial with PTFE (0.010") Septum and Cap | |
| 5183-4464 | 186000841 | 806550-13 | 13mm/425 Black PP Open-Hole Cap with PTFE/Silicone Septum |
| 186000842 | 806070-13 | 13mm/425 Black PP Open-Hole Cap with PTFE/Silicone with Slit | |
| WAT072711 | 5310-13 | 13mm/425 Black Polypropylene (PP) Open-Hole Cap | |
| WAT073005 | 601010-13 | 12mm x 0.010" White PTFE Septum | |
| WAT015199 | 403-638X | 300uL Glass Limited Volume Insert, 6x38mm | |
| WAT072030 | 403P-638 | 300uL Polypropylene Limited Volume Insert, 6x38mm |