ZA FID Zero Air Generator with Compressor
ZA FID Zero Air Generator with Compressor
LNI ZA FID Zero Air Generator with Compressor
The AirGen series ZA FID-C Air is able to remove the total hydrocarbons to less than 0.05 ppm. Very compact, the ZA FID-C is available with a low noise built-in pistons compressor, 100% oil-free.
The filtration of the hydrocarbons is performed using a catalytic oven filled with palladium. The reduction of hydrocarbons, including methane, and carbon monoxide decrease the background noise level and gives much better baseline stability, considerably increasing detector sensitivity and ensuring precise analytical results. High efficiency coalescing pre-filtration and post filtration of particulate size greater than 0.01 microns are used to prevent any kind of particles from entering the analytical device. The ZA FID-C Air has a very simple and efficient interface. It can also be managed by the HydroGen series HG PRO and HG BASIC and is ideal to supply Hydrocarbon free Air to FID detectors.
- Easy use and quick installation
- High flow rate up to 6 L/min
- Pressure up to 7 bar
- RS 485 and RS232 as standard
- Purity: < 0.05 ppm THC
- Dew-point <-30°C
- Reduced foot print
- Stackable with HG BASIC and HG PRO
Technical specifications
| Models: ZA FID AIR C | 1.5 | 3.0 | 6.0 |
| Zero Air outlet | |||
| Flow rate (Max) | 1.5 l/min | 3.0 l/min | 6.0 l/min |
| Outlet pressure (min) | 2 bars (29 psi) | ||
| Outlet pressure (Max) | 7 bars (100 psi) | ||
| Total hydrocarbon content | < 0.05ppm | ||
| Dew-point *1 | < -30°C (-22°F) | ||
| Communication | |||
| RS485 | Standard | ||
| RS232 | Standard | ||
| General data | |||
| Supply voltage | 110 or 230Vac (±10%) 50/60 Hz | ||
| Connection type | IEC320-C14 | ||
| Nominal power (Max) | 750W | ||
| Fuse rating (5x20mm) | 10A (250Vac – T) | ||
| Dimensions (W x D x H) | 27 x 44 x 41 cm | ||
| Net weight | 35 kg | ||
| Noise | 58dB(A) @ 1,5 m from front | ||
| Connections | |||
| Outlet port | 1/8″ female BSPP | ||
| Water drain port | 1/8″ female BSPP | ||
| Operating conditions | |||
| Temperature | 5-35°C (41-95°F) | ||
| Humidity (max, non condensing) | 80% [5-35°C (41-95°F)] | ||
| IP rating | IP20 | ||